The VTC 1030 is a compact, rugged, and entry-level vehicle computer with an Intel Atom x6211E dual-core processor 1.3GHz/3GHz (burst) that's built to withstand the harsh in-vehicle environment. It is especially for vehicles with limited space to locate the computer system, but without compromising its space to scarify its features, due to the compact design.
Key Features:
Intel Atom x6211E dual-core processor, 6W
Compact and fanless design
5G NR and Wi-Fi 6/6E wireless communication options
Built-in GNSS receiver with optional dead reckoning function
Built-in 1 x CAN bus 2.0B (optional SAE J1939)
Wide range DC input from 9~36V
Smart power management with ignition on/off delay via software control and low voltage protection
1 x 260-pin DDR4 SO-DIMM socket support 3200MHz up to 32GB. Default 2666MHz, 4GBWith In-Band ECC (IBECC)
Video Output
1 x HDMI 1.4b up to 3840 x 2160@30Hz1 x VGA port 1920 x 1200@60Hz
Storage
1 x 2.5” SATA 3.0 internal drive bay (9.5mm)1 x mSATA slot (occupied mini-PCIe slot)
Expansion
1 x Full size mini-PCIe socket (USB 2.0, PCIe 3.0/SATA 3.0)1 x M.2 2230 Key E socket (USB 2.0, PCIe 3.0 x2)1 x M.2 3042/3050/3052 Key B socket (USB 2.0, USB 3.2 Gen 2) for LTE/5G NR module with 2 x external micro-SIM
GNSS and Onboard Sensor
1 x Default U-blox NEO-M9N GNSS module for GPS+QZSS/Glonass/Galileo/BeidouOptional M8U modules with dead reckoning available1 x 3D accelerometer and 3D gyroscope
LAN
2-port LAN RJ45, 10/100/1000/2500 Mbps Ethernet, Intel® I225-IT
Security
TPM 2.0: infineon SLB9670VQ2.0 FW7.62
I/O Interface-Front
6 x LED indicators (including 1 x programmable LED)1 x USB 3.2 Gen 2 type A (5V/0.9A)1 x USB 2.0 type A (5V/0.5A)2 x Externally accessible micro-SIM card sockets with cover1 x Reset button1 x Power button1 x DB9 (COM1) for full RS232/422/4851 x Mic-in, 1 x Line-out2 x LAN RJ45, 10/100/1000/2500 Mbps2 x RP-SMA connector holes for WLAN1 x SMA connector for GNSS
I/O Interface-Rear
1 x HDMI1 x VGA1 x DB9 (COM2) for full RS232/422/4851 x DB15 (CAN/DIO) - 1 x Isolated CANBus 2.0B - 5 x DI and 4 x DO - Power in for DIO isolation, 9~36VDC1 x 3-pin terminal block for 9V~36VDC1 x Connector (4 x 2) for 12VDC/2A output, reset, power button, RS232 (Tx/Rx)4 x SMA connector holes for WWAN
Power Management & Software Support
Power input 9~36VDC
Cranking voltage: 6V~9V (< 30 seconds)
Reverse protection, OCP & UVP
Selectable boot-up & shut-down voltage for low power protection by software
Setting 8-level power on/off delay time by software
10~255 seconds WDT support, setup by software
SDK (Windows/Linux) including utility and sample code
Operating System
Windows 11/Windows 10/Linux
Dimensions
185mm (W) x 120mm (D) x 45mm (H)
Weight
1.20kg
Environment
Operating temperatures - -40°C to 70°C (w/ 6W TDP CPU, industrial SSD) with airflow
Storage temperatures: -40°C to 85°C
Relative humidity: 90% (non-condensing)
Vibration (random) - 2g@5~500 Hz (in operation, SSD)
The VTC 1030 is a compact, rugged, and entry-level vehicle computer with an Intel Atom x6211E dual-core processor 1.3GHz/3GHz (burst) that's built to withstand the harsh in-vehicle environment. It is especially for vehicles with limited space to locate the computer system, but without compromising its space to scarify its features, due to the compact design.
Key Features:
Intel Atom x6211E dual-core processor, 6W
Compact and fanless design
5G NR and Wi-Fi 6/6E wireless communication options
Built-in GNSS receiver with optional dead reckoning function
Built-in 1 x CAN bus 2.0B (optional SAE J1939)
Wide range DC input from 9~36V
Smart power management with ignition on/off delay via software control and low voltage protection
