Shop MTS210I SATA III M.2 SSD at Tekdis LLC

Details

The MTS210I features the SATA III 6Gb/s interface and 112-layer 3D NAND flash, delivering density breakthrough that greatly improves storage efficiency. Its built-in DRAM cache allows faster random speeds while the 30µ" gold finger PCB, Corner Bond technology, and anti-sulfur resistor guarantee its reliability in harsh conditions. Transcend also adopts the SLC Mode technology to enable the drive to reach competitive speeds and endurance that are equal to the SLC flash. The MTS210I is fully tested in-house, operating stably in a wide operating temperature range(-40℃~85℃).

Key Features:

Firmware:

Dynamic thermal throttling
Built-in LDPC ECC (Error Correction Code) functionality
Advanced Global Wear-Leveling and Block management for reliability
Advanced Garbage Collection
Static Data Refresh
Early Move
Supports S.M.A.R.T. function to conduct health monitoring, analysis, and reporting for storage devices
NCQ command for better performance
Full drive encryption with Advanced Encryption Standard (AES) (optional)
Power-saving DevSleep (Device Sleep) mode (optional)

Hardware:

Compliant with RoHS 2.0 standards
Space-saving M.2 form factor (42mm) – ideal for mobile computing devices
DDR3 DRAM Cache embedded
High-quality 3D NAND flash and SLC mode for exceptional endurance and reliability
Endurance: 100K P/E cycles (Program/Erase cycles) guaranteed
Key components fortified by default with Corner Bond technology
30µ" PCB gold finger
Anti-sulfur technology implemented to prevent sulfurization in the environment
Power Shield (PS) to ensure data transfer integrity and minimize data corruption in the drive during an abnormal power outage
Promised operational reliability in a wide temperature range (from -40°C to 85°C)

More Information

brand

Transcend

Specifications

Appearance
Dimensions	42 mm x 22 mm x 3.58 mm (1.65" x 0.87" x 0.14")
Weight	5 g (0.18 oz)
M.2 Type	2242-D2-B-M (Double-sided)
Form Factor	M.2 2242
Interface
Bus Interface	SATA III 6Gb/s
Storage
Capacity	40 GB/ 80 GB/ 160 GB/ 320 GB
Flash Type	112-layer 3D NAND flash (SLC mode)
Operating Environment
Operating Voltage	3.3V±5%
Operating Temperature	Wide Temp. -40°C (-40°F) ~ 85°C (185°F)
Storage Temperature	-55°C (-67°F) ~ 85°C (185°F)
Humidity	5% ~ 95%
Shock	1500 G, 0.5 ms, 3 axis
Vibration (Operating)	20 G (peak-to-peak), 2 Hz ~ 2,000 Hz (frequency)
Power
Power Consumption (Operation)	2.7 watt(s)
Power Consumption (Sleep)	1.1 watt(s)
Performance
Sequential Read/Write (CrystalDiskMark)	Read: up to 560 MB/s Write: up to 400 MB/s
4K Random Read/Write (IOmeter)	Read: up to 38,000 IOPS Write: up to 75,000 IOPS
Mean Time Between Failures (MTBF)	3,000,000 hour(s)
Terabytes Written (TBW)	up to 2,289 TBW
Drive Writes Per Day (DWPD)	52.3 (3 yrs)
Note	Speed may vary due to host hardware, software, usage, and storage capacity. The workload used to rate DWPD may be different from your actual workload, which may vary due to host hardware, software, usage, and storage capacity. Terabytes Written (TBW) expresses the endurance under the highest capacity.

Description

The MTS210I features the SATA III 6Gb/s interface and 112-layer 3D NAND flash, delivering density breakthrough that greatly improves storage efficiency. Its built-in DRAM cache allows faster random speeds while the 30µ" gold finger PCB, Corner Bond technology, and anti-sulfur resistor guarantee its reliability in harsh conditions. Transcend also adopts the SLC Mode technology to enable the drive to reach competitive speeds and endurance that are equal to the SLC flash. The MTS210I is fully tested in-house, operating stably in a wide operating temperature range(-40℃~85℃).

Key Features:

Firmware:

Dynamic thermal throttling
Built-in LDPC ECC (Error Correction Code) functionality
Advanced Global Wear-Leveling and Block management for reliability
Advanced Garbage Collection
Static Data Refresh
Early Move
Supports S.M.A.R.T. function to conduct health monitoring, analysis, and reporting for storage devices
NCQ command for better performance
Full drive encryption with Advanced Encryption Standard (AES) (optional)
Power-saving DevSleep (Device Sleep) mode (optional)

Hardware:

Compliant with RoHS 2.0 standards
Space-saving M.2 form factor (42mm) – ideal for mobile computing devices
DDR3 DRAM Cache embedded
High-quality 3D NAND flash and SLC mode for exceptional endurance and reliability
Endurance: 100K P/E cycles (Program/Erase cycles) guaranteed
Key components fortified by default with Corner Bond technology
30µ" PCB gold finger
Anti-sulfur technology implemented to prevent sulfurization in the environment
Power Shield (PS) to ensure data transfer integrity and minimize data corruption in the drive during an abnormal power outage
Promised operational reliability in a wide temperature range (from -40°C to 85°C)

Reviews

Write Your Own Review

Downloads

Datasheet

MTS210I SATA III M.2 SSD

Appearance

Interface

Storage

Operating Environment

Power

Performance